Specification
[Thickness]	300/350/400/450/500 micrion
[Dimension]	9mx5m,10mx4m,10mx6m,11mx5m,12mx5m,14mx5m,etc
[Colour]	blue
[Component]	PE bubble,UV
[Bubble diameter-large bubble]	10mm
[Bubble diameter-small bubble]	20mm

 

Outdoor pool:

The evaporation rate from an outdoor pool varies depending on the pool's temperature, air temperature and humidity, and the wind speed at the pool surface. The higher the pool temperature and wind speed and the lower the humidity, the greater the evaporation rate. In windy areas, you can add a windbreak—trees, shrubs, or a fence—to reduce evaporation. The windbreak needs to be high enough and close enough to the pool that it doesn't create turbulence over the pool, which will increase evaporation. You also don't want the windbreak to shade the pool from the sun, which helps heat it.

Indoor pool:

Indoor pools aren't subjected to the environment, but they still can lose a lot of energy from evaporation. They even require room ventilation to control indoor humidity caused by the large amount of evaporation. The ventilated air also must be conditioned, which adds to the energy costs.

Pool covers minimize evaporation from both outdoor and indoor pools. Covering a pool when it is not in use is the single most effective means of reducing pool heating costs. Savings of 50%–70% are possible. Pool covers on indoor pools not only can reduce evaporation but also the need to ventilate indoor air and replace it with unconditioned outdoor air. You can also shut off exhaust fans when an indoor pool is covered, which saves even more energy.